The 3 Steps to Paving Restoration

If your patio or driveway is starting to look a bit tired and worn, then you might want to consider using our paving restoration service. We can restore any tired-looking paved area that may have been neglected back to its former glory.

There are just three steps to restoration:

1. Repair

2. Clean

3. Seal

1. Repair

Changes in temperature and the heavy use that patios and driveways endure will gradually take their toll. Slabs may become cracked or sunken over the years and this can be a trip hazard. Our experienced team can carry out a full inspection of your paving work and identify what repairs are needed. We will replace slabs or bricks where necessary and make sure all are correctly laid to make an even surface.

2. Clean

The next stage is to give your patio or driveway a thorough clean. This will remove any grime, grease and dirt that will have built up over the years and restore the colour that it had when originally laid. We use a diesel-powered mobile pressure washer that is specifically designed for cleaning stone and brick in situ without washing away the kiln-dried sand that is locking your slabs together.

3. Seal

Lastly, we allow your patio or driveway to dry-out fully before applying a top-quality sealant to ensure that your paving continues to look good for many years to come.

If you have an area of paving work that could do with a little tender loving care, then don’t hesitate to contact us on 01603 360548 or email us any questions to enquiries@knightslandscaping.co.uk.